SP4T RF Pin Diode Switches to 16 GHz
The 4-way series of absorptive and reflective switches operate from 100 MHz to 16 GHz. They are rated at 200 mW maximum input power and have a switching time of 100 ns. SP4T switches that operate up to 8 GHz have a maximum VSWR of 1.6:1 and minimum isolation of 60 dB. All absorptive and reflective switches manufactured by Pulsar Microwave require both positive and negative 5-volt supplies. Additionally, the TTL control logic operates from 0 to +5 VDC. Voltage connection is made with feed thru terminals. Ground connection is made through the chassis and turret terminals.
Filter By:
-
|
Input Frequency Range (GHz) |
Switch Type |
Insertion Loss (dB) max. |
Input Power mw/dBm |
Isolation (dB) min. |
VSWR |
Switching Time (nsec) |
Connector Type |
P/N | |
|---|---|---|---|---|---|---|---|---|---|
| Min | Max | ||||||||
| 0.1 | 1.0 | SP4T | 1.8 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW4AD-28 Add to RFQ |
| 0.5 | 2.0 | SP4T | 2.6 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW4AD-29 Add to RFQ |
| 1.0 | 4.0 | SP4T | 2.8 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW4AD-30 Add to RFQ |
| 2.0 | 8.0 | SP4T | 3.4 | 200/23 | 55 | 1.60:1 | 100 | SMA | SW4AD-32 Add to RFQ |
Filter By:
-
|
Input Frequency Range (GHz) |
Switch Type |
Insertion Loss (dB) max. |
Input Power mw/dBm |
Isolation (dB) min. |
VSWR |
Switching Time (nsec) |
Connector Type |
P/N | |
|---|---|---|---|---|---|---|---|---|---|
| Min | Max | ||||||||
| 0.1 | 1.0 | SP4T | 1.2 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW4RD-28 Add to RFQ |
| 0.5 | 2.0 | SP4T | 1.8 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW4RD-29 Add to RFQ |
| 1.0 | 4.0 | SP4T | 1.8 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW4RD-30 Add to RFQ |
| 2.0 | 8.0 | SP4T | 2.4 | 200/23 | 60 | 1.60:1 | 100 | SMA | SW4RD-31 Add to RFQ |
| 0.3 | 12.0 | SP4T | 2.7 | 200/23 | 60 | 2.00:1 | 100 | SMA | SW4RD-32 Add to RFQ |
| 0.3 | 16.0 | SP4T | 3.2 | 200/23 | 55 | 2.00:1 | 100 | SMA | SW4RD-33 Add to RFQ |
Specifications:
- Driver Schottky TTL
- Voltage/Current Required:
- +5 Vdc @ +80 mA, Typical
- -5 Vdc @ -40 mA, Typical
- Higher speeds available.
- Individual TTL Control Logic:
- Logic "0" (-0.3V to +0.8V) = ON
- Logic "1" (+2.0V to +5.0V) = OFF
| TTL Control Logic | |||||||
|---|---|---|---|---|---|---|---|
| L1 | L2 | L3 | L4 | IN-J1 | IN-J2 | IN-J3 | IN-J4 |
| 0 | 1 | 1 | 1 | Loss | Isol. | Isol. | Isol. |
| 1 | 0 | 1 | 1 | Isol. | Loss | Isol. | Isol. |
| 1 | 1 | 0 | 1 | Isol. | Isol. | Loss | Isol. |
| 1 | 1 | 1 | 0 | Isol. | Isol. | Isol. | Loss |